Trouver Machine à Tatouer Junebug, Machine De Tatouage Junebug, dans le répertoire Industry, Reliable Fabricant / Fournisseur / Factory de Chine

Panier (0)

Les dernières alertes produit

N105011 junebug tattoo machine

Informations de base

Modèle: N105011 junebug tattoo machine

Description du produit

Spécifications N105011 junebug tattoo machine
Couleur 1.Red
Machine de tatouage 2.Shader
Machine de tatouage 3.High qualité
4. Machines de tatouage


Nouveaux produits

N105011 junebug tattoo machine
Nous fabriquons également une machine à tatouer 8wraps, 12warps, 14wraps.
Bienvenue à personnaliser, faire de la machine à tatouer selon votre style et vos exigences.
Supprimez différents matériaux pour la machine à tatouer, comme le fer, le laiton, l'acier inoxydable, le cuivre, etc.
Description du produit
Model N105011 junebug tattoo machine
Frame Material Iron tattoo machine frames
Construction Casting Tattoo Machines
Purpose recommended Liner or Shader  Sell Tattoo Machines Factory

Color

Black
Working Voltage 3-12V
Starting Voltage 3V
Running Speed 7200 switch / min  Sell Tattoo Machines Factory
Capacitor 47μ
A-Bar Material Pure Iron Sell Tattoo Machines Factory
Front Binder Material Iron
Rear Binder Material Iron Sell Tattoo Machines Factory
Spring Thickness 0.50mm rear spring & 0.50mm front spring
Optimum Voltage 5~8V
Dimensions (3.03 x 2.87 x 0.79)" / (7.7 x 7.3 x 2)cm (L x W x H)










Paiement:

Region

Shipping Agent

Days

US,CA

UPS/DHL/Fedex

3-4(EMS +4days)

UK,IR,W/E Europe

UPS/DHL/Fedex

3-5(EMS +4days)

Middle East

UPS/DHL/Fedex

3-5(EMS +4days)

AU,NZ

UPS/DHL/Fedex

3-5(EMS +4days)

Asia

UPS/DHL/Fedex

3-4(EMS +4days)

Afeica

UPS/DHL/Fedex

4-6(EMS +4days)

South America

UPS/DHL/Fedex

3-5(EMS +4days)

Russia

UPS/DHL/Fedex

contact me


Q: Les fournitures de tatouage Freedom prennent-elles des retours?
R: Oui, nous le faisons. Le client doit nous appeler ou nous envoyer un courriel en expliquant le motif du retour. L'expédition de retour de l'objet est la responsabilité du client. Si l'erreur est de notre part, nous expédierons gratuitement les articles de remplacement. Le flash, les aiguilles ouvertes ou les tubes jetables ouverts ne sont pas remboursables sous aucune condition.
Q: Comment transmettre les commandes?
R: Nous avons cinq express: UPS, FEDEX, DHL, EMS. Pour une grande commande, nous expédierons par mer.
Q: Combien de temps faut-il pour recevoir ma commande?
R: Nous ferons tout notre possible pour expédier votre commande dans les 3 à 7 jours ouvrables suivant la réception. Pendant les vacances, notre temps de traitement de la commande peut augmenter en raison des sauvegardes.
Q: Quelles méthodes de paiement sont acceptées?
R: Nous acceptons trois paiements: Bank Transfe, West union, PayPal.







Informaitons supplémentaires.
Pourquoi ne peut-on pas démarrer la machine?
 Malfunction   Solution 
 The elastic rod does not touch the contact point of the inclined spring plate  Loosen the screw of elastic rod, rotate down the elastic rod to the contact point, and then regulate the rod to the right position. Finally tighten the screw to lock the elastic rod.
 The switch is off  Connect it to 220V AC power supply and turn on the switch. The indicator turns red.
 Both of adjustable knob (VOLTAGE) and V meter hand are in "0"  Rotate the adjustable knob clockwise slowly. Simultaneously, V meter hand is also moving and should stop at 10V-12V.
 The elastic rod touches the contact point of front spring so tightly that the machine cannot start and maybe will cause short circuit. Turn on the switch and the indicator turns green (No voltage)  Loosen the screw of elastic rod, rotate up the elastic rod and then rotate it down to the contact point, and finally regulate it to the right position. Restart the power, the machine will be ok.
 Disconnection  Check the foot switch and the plug to avoid disconnecting the cord from the joint position caused by careless jerk.
 Broken wires  The wires be susceptible to damage while washing and sterilizing the tattoo machine, so please confirm the wires condition and have the broken ones welded before use.
Problems of plugs and foot switch  Turn on the switch and check whether the plugs of cord and foot switch are broken or not, when short circuit happens (green indicator). The damaged ones should be welded with electric welding rod.

Liste des produits


Groupes de Produits : Aiguilles de tatouage > RL-Round Liner